How do I add/remove an inspector? (2020.11)
Set up or remove a user as an inspector.
Change a user rights in Community Development to make a user an inspector. After a user is set up as an inspector, you can assign the user to an inspection type to allow the user to fill the inspector role. Users who have not be set up as an inspector will not be included in the drop-down list that you'll use to select an inspector.
Setting up a user as an inspector
1. Open Connect Community Development > Organization > Users.
2. Use the User box to enter a user name and then press Enter.
User box
3. Set up the Assign to Inspections For.
The Community Development application can create inspections for the inspection types in the list. Assigning an inspection type to a user means you can assign the user to all of the inspection types that have been created for the item type.
Assign to Inspections For
4. Click Save (CTRL+S).
The user can be assigned as the inspector on the selected inspection types.
202011, 2020Jul13
Removing an inspector as an inspector
1. Open Connect Community Development > Organization > Users.
2. Use the User box to enter a user name and then press Enter.
User box
3. Use the Assign to Inspections For section to remove item types from the user.
If you remove the checkmark from every checkbox, you will remove the user as an inspector from everything.
Assign to Inspections For
4. Click Save (CTRL+S).
The user record is updated and saved with the new inspection rights.
202011, 2020Jul13
Copyright © 2020 Caselle, Incorporated. All rights reserved.